2009IEEE Microwave and Wireless Components LettersRequires access

CMOS Colpitts Quadrature VCO Using the Body Injection-Locked Coupling Technique

Sheng‐Lyang Jang, S.-H. Huang, C.-C. Liu, M.H. Juang

Open publisher page 41 citations

Abstract

This paper presents a new low phase noise quadrature voltage-controlled oscillator (QVCO), which consists of two differential complementary Colpitts voltage-controlled oscillators (VCOs) with a tail inductor. The output of the tail inductor in one differential VCO is injected to the bodies of the nMOSFETs in the other differential VCO and vice versa. The proposed CMOS QVCO has been implemented with the TSMC 0.18 mum CMOS technology and the die area is 0.725 times 0.839 mm2. At the supply voltage of 1.1 V, the total power consumption is 9.9 mW. The free-running frequency of the QVCO is tunable from 5.26 GHz to 5.477 GHz as the tuning voltage is varied from 0.0 V to 1.1 V. The measured phase noise at 1 MHz frequency offset is -124.36 dBc/Hz at the oscillation frequency of 5.44 GHz and the figure of merit (FOM) of the proposed QVCO is -189.1 dBc/Hz.

About this research paper

What this paper is about

This paper presents a new low phase noise quadrature voltage-controlled oscillator (QVCO), which consists of two differential complementary Colpitts voltage-controlled oscillators (VCOs) with a tail inductor. The output of the tail inductor in one differential VCO is injected to the bodies of the nMOSFETs in the other differential VCO and vice versa. The proposed CMOS QVCO has been implemented with the TSMC 0.18 mum CMOS technology and the die area is 0.725 times 0.839 mm2. At the supply voltage of 1.1 V, the total power consumption is 9.9 mW. The free-running frequency of the QVCO is tunable from 5.26 GHz to 5.477 GHz as the tuning voltage is varied from 0.0 V to 1.1 V. The measured phase noise at 1 MHz frequency offset is -124.36 dBc/Hz at the oscillation frequency of 5.44 GHz and the figure of merit (FOM) of the proposed QVCO is -189.1 dBc/Hz.

Why it matters

OpenAlex reports 41 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

This paper presents a new low phase noise quadrature voltage-controlled oscillator (QVCO), which consists of two differential complementary Colpitts voltage-controlled oscillators (VCOs) with a tail inductor. The output of the tail inductor in one differential VCO is injected to the bodies of the nMOSFETs in the other differential VCO and vice versa. The proposed CMOS QVCO has been implemented with the TSMC 0.18 mum CMOS technology and the die area is 0.725 times 0.839 mm2. At the supply voltage of 1.1 V, the total power consumption is 9.9 mW. The free-running frequency of the QVCO is tunable from 5.26 GHz to 5.477 GHz as the tuning voltage is varied from 0.0 V to 1.1 V. The measured phase noise at 1 MHz frequency offset is -124.36 dBc/Hz at the oscillation frequency of 5.44 GHz and the figure of merit (FOM) of the proposed QVCO is -189.1 dBc/Hz.

Key concepts: Voltage-controlled oscillator, Colpitts oscillator, Phase noise, dBc, CMOS, Figure of merit, Inductor, Electrical engineering

Related papers

Back to paper searchBrowse research topicsOriginal source
CMOS Colpitts Quadrature VCO Using the Body Injection-Locked Coupling Technique — Research Paper | ScholarLens