ScholarLens Back to search
2014•Defect and diffusion forum/Diffusion and defect data, solid state data. Part A, Defect and diffusion forumOpen access

Characterization of Gamma Irradiated PP/LDPE Blend

Tatiana Mayumi Moori, Mauro César Terence, Nilson Casimiro Pereira, Sonia Braunstein Faldini, Leila Figueiredo de Miranda

Open full text 1 citations

Abstract

This study analyzed nine polypropylene (PP) and low-density polyethylene (LDPE) blends where the mass concentrations of each sample were changed, proportionally. The aim was to investigate the tensile strength by means of these polymers best combination, before and after its exposal to gamma rays. The results showed that the 20/80 - PP/LDPE blend had a better performance concerning mechanical properties after irradiation, where the maximums tensile stress had an average increase of 30% in 30 and 50 kGy doses and 33% in the 200 kGy dose. On the other hand, it was verified that the higher blend's PP concentration, the higher its tensile strength will be (except for 100 kGy and 200 kGy doses which PP concentration over 70% can cause eventual degradation in the polymeric chains of the blend).

About this research paper

What this paper is about

This study analyzed nine polypropylene (PP) and low-density polyethylene (LDPE) blends where the mass concentrations of each sample were changed, proportionally. The aim was to investigate the tensile strength by means of these polymers best combination, before and after its exposal to gamma rays. The results showed that the 20/80 - PP/LDPE blend had a better performance concerning mechanical properties after irradiation, where the maximums tensile stress had an average increase of 30% in 30 and 50 kGy doses and 33% in the 200 kGy dose. On the other hand, it was verified that the higher blend's PP concentration, the higher its tensile strength will be (except for 100 kGy and 200 kGy doses which PP concentration over 70% can cause eventual degradation in the polymeric chains of the blend).

Why it matters

OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

This study analyzed nine polypropylene (PP) and low-density polyethylene (LDPE) blends where the mass concentrations of each sample were changed, proportionally. The aim was to investigate the tensile strength by means of these polymers best combination, before and after its exposal to gamma rays. The results showed that the 20/80 - PP/LDPE blend had a better performance concerning mechanical properties after irradiation, where the maximums tensile stress had an average increase of 30% in 30 and 50 kGy doses and 33% in the 200 kGy dose. On the other hand, it was verified that the higher blend's PP concentration, the higher its tensile strength will be (except for 100 kGy and 200 kGy doses which PP concentration over 70% can cause eventual degradation in the polymeric chains of the blend).

Key concepts: Low-density polyethylene, Polypropylene, Ultimate tensile strength, Materials science, Composite material, Polyethylene, Polymer, Irradiation

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
Characterization of Gamma Irradiated PP/LDPE Blend — Research Paper | ScholarLens