2007Microwave and Optical Technology LettersRequires access

A 3.5 GHz low‐power and phase noise differential CMOS VCO

Sheng‐Lyang Jang, Yuan‐Kai Wu, Chien‐Feng Lee

Open publisher page 1 citations

Abstract

Abstract A novel low‐power differential Colpitts voltage‐controlled oscillator (VCO) is proposed and implemented in a 0.18‐μm CMOS 1P6M process. The proposed circuit topology consists of two single‐ended Colpitts LC‐tank VCOs, and the differential VCO is obtained by using a cross‐coupled nMOS pair. At the supply voltage of 1.8 V, the output phase noise of the VCO is −120.56 dBc/Hz at 1 MHz offset frequency from the carrier frequency of 3.64 GHz, and the figure of merit is −185.9 dBc/Hz. Total power consumption is 3.8 mW. Tuning range is about 487 MHz, from 3.64 to 3.15 GHz, while the control voltage was tuned from 0 to 1.8 V. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 153–156, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23003

About this research paper

What this paper is about

Abstract A novel low‐power differential Colpitts voltage‐controlled oscillator (VCO) is proposed and implemented in a 0.18‐μm CMOS 1P6M process. The proposed circuit topology consists of two single‐ended Colpitts LC‐tank VCOs, and the differential VCO is obtained by using a cross‐coupled nMOS pair. At the supply voltage of 1.8 V, the output phase noise of the VCO is −120.56 dBc/Hz at 1 MHz offset frequency from the carrier frequency of 3.64 GHz, and the figure of merit is −185.9 dBc/Hz. Total power consumption is 3.8 mW. Tuning range is about 487 MHz, from 3.64 to 3.15 GHz, while the control voltage was tuned from 0 to 1.8 V. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 153–156, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23003

Why it matters

OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Abstract A novel low‐power differential Colpitts voltage‐controlled oscillator (VCO) is proposed and implemented in a 0.18‐μm CMOS 1P6M process. The proposed circuit topology consists of two single‐ended Colpitts LC‐tank VCOs, and the differential VCO is obtained by using a cross‐coupled nMOS pair. At the supply voltage of 1.8 V, the output phase noise of the VCO is −120.56 dBc/Hz at 1 MHz offset frequency from the carrier frequency of 3.64 GHz, and the figure of merit is −185.9 dBc/Hz. Total power consumption is 3.8 mW. Tuning range is about 487 MHz, from 3.64 to 3.15 GHz, while the control voltage was tuned from 0 to 1.8 V. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 153–156, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23003

Key concepts: Voltage-controlled oscillator, Colpitts oscillator, Phase noise, dBc, Electrical engineering, NMOS logic, CMOS, Voltage

Related papers

Back to paper searchBrowse research topicsOriginal source
A 3.5 GHz low‐power and phase noise differential CMOS VCO — Research Paper | ScholarLens