ScholarLens Back to search
2002•Journal of Applied Polymer ScienceRequires access

Adsorption and desorption of copper(II) from solutions on new spherical cellulose adsorbent

Minghua Liu, Yun Deng, Huaiyu Zhan, Zhang Xin-shen

Open publisher page 93 citations

Abstract

Abstract An investigation was conducted on the adsorption and desorption of copper(II) from aqueous solutions with a new spherical cellulose adsorbent containing the carboxyl anionic group. Various factors affecting the adsorption were optimized. The adsorption of Cu2+ ions on the adsorbent was found to be dependent on the initial time and pH, the concentration, and the temperature. The adsorption process follows both Freundlich and Langmuir adsorption isotherms and was found to be endothermic (ΔH = 23.99 kJ/mol). The Cu2+ ions adsorbed on the adsorbent can be recovered with a NaOH or HCl aqueous solution. The maximum percentage of recovery is about 100% when 2.4 mol/L HCl solution is used. In addition, only 7.2% of the adsorption capacity is lost after 30 replications of the adsorption and desorption. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 478–485, 2002; DOI 10.1002/app.10114

About this research paper

What this paper is about

Abstract An investigation was conducted on the adsorption and desorption of copper(II) from aqueous solutions with a new spherical cellulose adsorbent containing the carboxyl anionic group. Various factors affecting the adsorption were optimized. The adsorption of Cu2+ ions on the adsorbent was found to be dependent on the initial time and pH, the concentration, and the temperature. The adsorption process follows both Freundlich and Langmuir adsorption isotherms and was found to be endothermic (ΔH = 23.99 kJ/mol). The Cu2+ ions adsorbed on the adsorbent can be recovered with a NaOH or HCl aqueous solution. The maximum percentage of recovery is about 100% when 2.4 mol/L HCl solution is used. In addition, only 7.2% of the adsorption capacity is lost after 30 replications of the adsorption and desorption. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 478–485, 2002; DOI 10.1002/app.10114

Why it matters

OpenAlex reports 93 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Abstract An investigation was conducted on the adsorption and desorption of copper(II) from aqueous solutions with a new spherical cellulose adsorbent containing the carboxyl anionic group. Various factors affecting the adsorption were optimized. The adsorption of Cu2+ ions on the adsorbent was found to be dependent on the initial time and pH, the concentration, and the temperature. The adsorption process follows both Freundlich and Langmuir adsorption isotherms and was found to be endothermic (ΔH = 23.99 kJ/mol). The Cu2+ ions adsorbed on the adsorbent can be recovered with a NaOH or HCl aqueous solution. The maximum percentage of recovery is about 100% when 2.4 mol/L HCl solution is used. In addition, only 7.2% of the adsorption capacity is lost after 30 replications of the adsorption and desorption. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 478–485, 2002; DOI 10.1002/app.10114

Key concepts: Adsorption, Aqueous solution, Desorption, Endothermic process, Freundlich equation, Copper, Cellulose, Langmuir

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
Adsorption and desorption of copper(II) from solutions on new spherical cellulose adsorbent — Research Paper | ScholarLens