2012Environmental Engineering ResearchOpen access

Removal of Cd(II) and Cu(II) from Aqueous Solution by Agro Biomass: Equilibrium, Kinetic and Thermodynamic Studies

Desireddy Harikishore Kumar Reddy, Seung-Mok Lee, Kalluru Seshaiah

Open full text 39 citations

Abstract

The removal of Cd(II) and Cu(II) from aqueous solution by an agricultural solid waste biomass prepared from Moringa oleifera bark (MOB) was investigated.The biosorbent was characterized by Fourier transform infrared spectroscopy and elemental analysis.Furthermore, the effect of initial pH, contact time, biosorbent dosage, initial metal ion concentration and temperature on the biosorption of Cd(II) and Cu(II) were studied using the batch sorption technique.Kinetic studies indicated that the biosorption process of the metal ions followed the pseudo-second order model.The biosorption data was analyzed by the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherm models.Based on the Langmuir isotherm, the maximum biosorption capacities for Cd(II) and Cu(II) onto MOB were 39.41 and 36.59mg/g at 323 K, respectively.The thermodynamic parameters, Gibbs free energy (ΔG o ), enthalpy (ΔH o ), and entropy (ΔS o ) changes, were also calculated, and the values indicated that the biosorption process was endothermic, spontaneous and feasible in the temperature range of 303-323 K.It was concluded that MOB powder can be used as an effective, low cost, and environmentally friendly biosorbent for the removal of Cd(II) and Cu(II) ions from aqueous solution.

Open-access reader

About this research paper

What this paper is about

The removal of Cd(II) and Cu(II) from aqueous solution by an agricultural solid waste biomass prepared from Moringa oleifera bark (MOB) was investigated.The biosorbent was characterized by Fourier transform infrared spectroscopy and elemental analysis.Furthermore, the effect of initial pH, contact time, biosorbent dosage, initial metal ion concentration and temperature on the biosorption of Cd(II) and Cu(II) were studied using the batch sorption technique.Kinetic studies indicated that the biosorption process of the metal ions followed the pseudo-second order model.The biosorption data was analyzed by the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherm models.Based on the Langmuir isotherm, the maximum biosorption capacities for Cd(II) and Cu(II) onto MOB were 39.41 and 36.59mg/g at 323 K, respectively.The thermodynamic parameters, Gibbs free energy (ΔG o ), enthalpy (ΔH o ), and entropy (ΔS o ) changes, were also calculated, and the values indicated that the biosorption process was endothermic, spontaneous and feasible in the temperature range of 303-323 K.It was concluded that MOB powder can be used as an effective, low cost, and environmentally friendly biosorbent for the removal of Cd(II) and Cu(II) ions from aqueous solution.

Why it matters

OpenAlex reports 39 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The removal of Cd(II) and Cu(II) from aqueous solution by an agricultural solid waste biomass prepared from Moringa oleifera bark (MOB) was investigated.The biosorbent was characterized by Fourier transform infrared spectroscopy and elemental analysis.Furthermore, the effect of initial pH, contact time, biosorbent dosage, initial metal ion concentration and temperature on the biosorption of Cd(II) and Cu(II) were studied using the batch sorption technique.Kinetic studies indicated that the biosorption process of the metal ions followed the pseudo-second order model.The biosorption data was analyzed by the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherm models.Based on the Langmuir isotherm, the maximum biosorption capacities for Cd(II) and Cu(II) onto MOB were 39.41 and 36.59mg/g at 323 K, respectively.The thermodynamic parameters, Gibbs free energy (ΔG o ), enthalpy (ΔH o ), and entropy (ΔS o ) changes, were also calculated, and the values indicated that the biosorption process was endothermic, spontaneous and feasible in the temperature range of 303-323 K.It was concluded that MOB powder can be used as an effective, low cost, and environmentally friendly biosorbent for the removal of Cd(II) and Cu(II) ions from aqueous solution.

Key concepts: Biosorption, Chemistry, Endothermic process, Aqueous solution, Freundlich equation, Sorption, Nuclear chemistry, Langmuir

Related papers

Back to paper searchBrowse research topicsOriginal source
Removal of Cd(II) and Cu(II) from Aqueous Solution by Agro Biomass: Equilibrium, Kinetic and Thermodynamic Studies — Research Paper | ScholarLens