ScholarLens Back to search
2013•Key engineering materialsOpen access

Study of the Impact Abrasive Wear of New Super-High Manganese Steel

Wen Yan Wang, Jian Xu, Jing Pei Xie

Open full text 2 citations

Abstract

Based on the traditional Mn13, the super-high manganese steel Mn18 was melted by means of adjusting the amount of C, Mn, adding a certain amount of alloying elements Cr, Mo etc and modification. The results show that with low-impact energy abrasive wear for 60 minutes, the wear resistance of super-high manganese steel Mn18 was greatly improved by contrast with that of Mn13, and the hardness of wear surface was increased slowly with the elapse of the wear time. However, under the high impact energy, the wear resistance of Mn18 is 1.5 times as high as that of Mn13, and the hardness of wear surface was increased to HB440 in a short time. The main wear forms were: cutting, gouging wear and plastic deformation. Typical TEM morphologies of subsurface wear structure consist mostly of high density dislocations, deformation bands.

About this research paper

What this paper is about

Based on the traditional Mn13, the super-high manganese steel Mn18 was melted by means of adjusting the amount of C, Mn, adding a certain amount of alloying elements Cr, Mo etc and modification. The results show that with low-impact energy abrasive wear for 60 minutes, the wear resistance of super-high manganese steel Mn18 was greatly improved by contrast with that of Mn13, and the hardness of wear surface was increased slowly with the elapse of the wear time. However, under the high impact energy, the wear resistance of Mn18 is 1.5 times as high as that of Mn13, and the hardness of wear surface was increased to HB440 in a short time. The main wear forms were: cutting, gouging wear and plastic deformation. Typical TEM morphologies of subsurface wear structure consist mostly of high density dislocations, deformation bands.

Why it matters

OpenAlex reports 2 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Based on the traditional Mn13, the super-high manganese steel Mn18 was melted by means of adjusting the amount of C, Mn, adding a certain amount of alloying elements Cr, Mo etc and modification. The results show that with low-impact energy abrasive wear for 60 minutes, the wear resistance of super-high manganese steel Mn18 was greatly improved by contrast with that of Mn13, and the hardness of wear surface was increased slowly with the elapse of the wear time. However, under the high impact energy, the wear resistance of Mn18 is 1.5 times as high as that of Mn13, and the hardness of wear surface was increased to HB440 in a short time. The main wear forms were: cutting, gouging wear and plastic deformation. Typical TEM morphologies of subsurface wear structure consist mostly of high density dislocations, deformation bands.

Key concepts: Abrasive, Materials science, Manganese, Wear resistance, Metallurgy, Deformation (meteorology), High energy, Adhesive wear

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
Study of the Impact Abrasive Wear of New Super-High Manganese Steel — Research Paper | ScholarLens