GNSS CODE AND CARRIER TRACKING IN THE PRESENCE OF MULTIPATH

It is well known that multipath represents a major error source in differential GNSS positioning. Errors produced are unique to each antenna position and so are uncorrelated between the reference station and the mobile receiver. Reduction techniques, such as narrow correlator spacing1 and the multipath estimating delay lock loop (MEDLL)2 have improved the situation. However, reflected signals emanating close to the antenna are not reduced by either technique. Carrier multipath is a particular problem because short delay multipath signals cause maximum carrier errors. This study describes the analysis that has been carried out into code and carrier tracking in the presence of multipath. Code tracking in this situation produces a non-zero mean error,3 and the source of this bias has been investigated. Code and carrier multipath errors of the global orbiting navigation satellite system (GLONASS) have been compared with those of the global positioning system (GPS). The effects of pre-correlation filtering on code and carrier multipath errors have been determined using data from a measured correlation function. The multipath fading bandwidth is also discussed, and fast and slow fading effects are presented. A comparison has been made of the performance of typical coherent and non-coherent code discriminators in the presence of multipath. The performance of the GPS and GLONASS P code signals have been determined with respect to code and carrier multipath errors. © 1997 by John Wiley & Sons, Ltd.