A 60 GHz Sub-Harmonic Resistive FET Mixer Using 0.13 $\mu{\rm m}$ CMOS Technology
Shih-Kai Lin, Jing-Lin Kuo, Huei Wang
Abstract
Shih-Kai Lin, Jing-Lin Kuo, Huei Wang
Abstract
A 56 to 66 GHz sub-harmonic resistive mixer using 0.13 μm CMOS technology is presented in this letter. This mixer exhibits a flat conversion loss of about -12 and -13 dB and good isolations between ports from 56 to 66 GHz for both down and up-conversion with a lowest LO power of 0 and -1 dBm. The 2LO-RF isolation is more than 27 dB even if IF input power exceeds 4 dBm, which results from the mechanism of connecting drain and body of the device. Besides, this mixer has a relatively high inputP1dBand a 3 GHz IF bandwidth in each band defined in IEEE 802.15.3c standard.
OpenAlex reports 12 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
A 56 to 66 GHz sub-harmonic resistive mixer using 0.13 μm CMOS technology is presented in this letter. This mixer exhibits a flat conversion loss of about -12 and -13 dB and good isolations between ports from 56 to 66 GHz for both down and up-conversion with a lowest LO power of 0 and -1 dBm. The 2LO-RF isolation is more than 27 dB even if IF input power exceeds 4 dBm, which results from the mechanism of connecting drain and body of the device. Besides, this mixer has a relatively high inputP1dBand a 3 GHz IF bandwidth in each band defined in IEEE 802.15.3c standard.
Key concepts: CMOS, Resistive touchscreen, Electrical engineering, dBm, Harmonic mixer, Physics, Optoelectronics, Radio frequency