2010Journal of Dairy ScienceOpen access

Effects of chemically or technologically treated linseed products and docosahexaenoic acid addition to linseed oil on biohydrogenation of C18:3n-3 in vitro

A.R. Sterk, R. Hovenier, B. Vlaeminck, A.M. van Vuuren, W.H. Hendriks, J. Dijkstra

Open full text 34 citations

Abstract

Rumen biohydrogenation kinetics of C18:3n-3 from several chemically or technologically treated linseed products and docosahexaenoic acid (DHA; C22:6n-3) addition to linseed oil were evaluated in vitro. Linseed products evaluated were linseed oil, crushed linseed, formaldehyde treated crushed linseed, sodium hydroxide/formaldehyde treated crushed linseed, extruded whole linseed (2 processing variants), extruded crushed linseed (2 processing variants), micronized crushed linseed, commercially available extruded linseed, lipid encapsulated linseed oil, and DHA addition to linseed oil. Each product was incubated with rumen liquid using equal amounts of supplemented C18:3n-3 and fermentable substrate (freeze-dried total mixed ration) for 0, 0.5, 1, 2, 4, 6, 12, and 24h using a batch culture technique. Disappearance of C18:3n-3 was measured to estimate the fractional biohydrogenation rate and lag time according to an exponential model and to calculate effective biohydrogenation of C18:3n-3, assuming a fractional passage rate of 0.060/h. Treatments showed no differences in rumen fermentation parameters, including gas production rate and volatile fatty acid concentration. Technological pretreatment (crushing) followed by chemical treatment applied as formaldehyde of linseed resulted in effective protection of C18:3n-3 against biohydrogenation. Additional chemical pretreatment (sodium hydroxide) before applying formaldehyde treatment did not further improve the effectiveness of protection. Extrusion of whole linseed compared with extrusion of crushed linseed was effective in reducing C18:3n-3 biohydrogenation, whereas the processing variants were not different in C18:3n-3 biohydrogenation. Crushed linseed, micronized crushed linseed, lipid encapsulated linseed oil, and DHA addition to linseed oil did not reduce C18:3n-3 biohydrogenation. Compared with the other treatments, docosahexaenoic acid addition to linseed oil resulted in a comparable trans11,cis15-C18:2 biohydrogenation but a lesser trans10+11-C18:1 biohydrogenation. This suggests that addition of DHA in combination with linseed oil was effective only in inhibiting the last step of biohydrogenation from trans10+11-C18:1 to C18:0.

Open-access reader

About this research paper

What this paper is about

Rumen biohydrogenation kinetics of C18:3n-3 from several chemically or technologically treated linseed products and docosahexaenoic acid (DHA; C22:6n-3) addition to linseed oil were evaluated in vitro. Linseed products evaluated were linseed oil, crushed linseed, formaldehyde treated crushed linseed, sodium hydroxide/formaldehyde treated crushed linseed, extruded whole linseed (2 processing variants), extruded crushed linseed (2 processing variants), micronized crushed linseed, commercially available extruded linseed, lipid encapsulated linseed oil, and DHA addition to linseed oil. Each product was incubated with rumen liquid using equal amounts of supplemented C18:3n-3 and fermentable substrate (freeze-dried total mixed ration) for 0, 0.5, 1, 2, 4, 6, 12, and 24h using a batch culture technique. Disappearance of C18:3n-3 was measured to estimate the fractional biohydrogenation rate and lag time according to an exponential model and to calculate effective biohydrogenation of C18:3n-3, assuming a fractional passage rate of 0.060/h. Treatments showed no differences in rumen fermentation parameters, including gas production rate and volatile fatty acid concentration. Technological pretreatment (crushing) followed by chemical treatment applied as formaldehyde of linseed resulted in effective protection of C18:3n-3 against biohydrogenation. Additional chemical pretreatment (sodium hydroxide) before applying formaldehyde treatment did not further improve the effectiveness of protection. Extrusion of whole linseed compared with extrusion of crushed linseed was effective in reducing C18:3n-3 biohydrogenation, whereas the processing variants were not different in C18:3n-3 biohydrogenation. Crushed linseed, micronized crushed linseed, lipid encapsulated linseed oil, and DHA addition to linseed oil did not reduce C18:3n-3 biohydrogenation. Compared with the other treatments, docosahexaenoic acid addition to linseed oil resulted in a comparable trans11,cis15-C18:2 biohydrogenation but a lesser trans10+11-C18:1 biohydrogenation. This suggests that addition of DHA in combination with linseed oil was effective only in inhibiting the last step of biohydrogenation from trans10+11-C18:1 to C18:0.

Why it matters

OpenAlex reports 34 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Rumen biohydrogenation kinetics of C18:3n-3 from several chemically or technologically treated linseed products and docosahexaenoic acid (DHA; C22:6n-3) addition to linseed oil were evaluated in vitro. Linseed products evaluated were linseed oil, crushed linseed, formaldehyde treated crushed linseed, sodium hydroxide/formaldehyde treated crushed linseed, extruded whole linseed (2 processing variants), extruded crushed linseed (2 processing variants), micronized crushed linseed, commercially available extruded linseed, lipid encapsulated linseed oil, and DHA addition to linseed oil. Each product was incubated with rumen liquid using equal amounts of supplemented C18:3n-3 and fermentable substrate (freeze-dried total mixed ration) for 0, 0.5, 1, 2, 4, 6, 12, and 24h using a batch culture technique. Disappearance of C18:3n-3 was measured to estimate the fractional biohydrogenation rate and lag time according to an exponential model and to calculate effective biohydrogenation of C18:3n-3, assuming a fractional passage rate of 0.060/h. Treatments showed no differences in rumen fermentation parameters, including gas production rate and volatile fatty acid concentration. Technological pretreatment (crushing) followed by chemical treatment applied as formaldehyde of linseed resulted in effective protection of C18:3n-3 against biohydrogenation. Additional chemical pretreatment (sodium hydroxide) before applying formaldehyde treatment did not further improve the effectiveness of protection. Extrusion of whole linseed compared with extrusion of crushed linseed was effective in reducing C18:3n-3 biohydrogenation, whereas the processing variants were not different in C18:3n-3 biohydrogenation. Crushed linseed, micronized crushed linseed, lipid encapsulated linseed oil, and DHA addition to linseed oil did not reduce C18:3n-3 biohydrogenation. Compared with the other treatments, docosahexaenoic acid addition to linseed oil resulted in a comparable trans11,cis15-C18:2 biohydrogenation but a lesser trans10+11-C18:1 biohydrogenation. This suggests that addition of DHA in combination with linseed oil was effective only in inhibiting the last step of biohydrogenation from trans10+11-C18:1 to C18:0.

Key concepts: Linseed oil, Chemistry, Food science, Formaldehyde, Rumen, Polyunsaturated fatty acid, Fatty acid, Biochemistry

Related papers

Back to paper searchBrowse research topicsOriginal source
Effects of chemically or technologically treated linseed products and docosahexaenoic acid addition to linseed oil on biohydrogenation of C18:3n-3 in vitro — Research Paper | ScholarLens