Development of a high transconductance GaN MMIC technology for millimeter wave applications
Carl Haupt, S. Maroldt, Rüdiger Quay, Wilfried Pletschen, Arnulf Leuther, O. Ambacher
Abstract
Carl Haupt, S. Maroldt, Rüdiger Quay, Wilfried Pletschen, Arnulf Leuther, O. Ambacher
Abstract
Abstract In this paper we report on the development of high transconductance GaN‐based high electron mobility transistors (HEMTs) to improve the performance at W‐Band frequencies. At first, the influence of the barrier thickness on the maximum transconductance (gm,max) was investigated by using two different technologies: growth of thin barrier layers and deep gate recess. Second, the effect of a gate length reduction down to 100 nm on gm,max was examined. The reduction of the barrier thickness results in a strong increase of the extrinsic transconductance up to 600 mS/mm. The technology was then used to fabricate HEMTs, with a cut‐off frequency of 110 GHz, which are compatible to a MMIC technology (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
OpenAlex reports 23 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Abstract In this paper we report on the development of high transconductance GaN‐based high electron mobility transistors (HEMTs) to improve the performance at W‐Band frequencies. At first, the influence of the barrier thickness on the maximum transconductance (gm,max) was investigated by using two different technologies: growth of thin barrier layers and deep gate recess. Second, the effect of a gate length reduction down to 100 nm on gm,max was examined. The reduction of the barrier thickness results in a strong increase of the extrinsic transconductance up to 600 mS/mm. The technology was then used to fabricate HEMTs, with a cut‐off frequency of 110 GHz, which are compatible to a MMIC technology (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
Key concepts: Transconductance, Monolithic microwave integrated circuit, Materials science, Optoelectronics, Extremely high frequency, Transistor, High-electron-mobility transistor, Microwave