2001•Caries ResearchRequires access

In situ Evaluation of Different Remineralization Periods to Decrease Brushing Abrasion of Demineralized Enamel

Thomas Attin, Swantje Knöfel, Wolfgang Buchalla, Rengin Tütüncü

Open publisher page 209 citations

Abstract

The aim of the present in situ study was to evaluate the effect of different periods of intraoral remineralization to decrease the susceptibility of previously demineralized enamel against toothbrushing abrasion. Six human enamel specimens (A-F) were recessed in the buccal aspects of each of eight intraoral appliances which were worn for 21 days by 8 panelists. Demineralization of the samples was performed twice a day extraorally in the acidic beverage Sprite Light for 90 s. Subsequently, the enamel specimens were brushed at different times. Specimen A was brushed immediately after the demineralization. The remaining samples B-E were brushed after the intraoral appliances had been worn for various periods of remineralization: specimen B, 10 min; C, 20 min; D, 30 min and E, 60 min, respectively. Specimen F was only demineralized and remineralized, but not brushed. After 21 days, enamel wear was measured with a laser profilometer. The following values (mean +/- standard deviation) were obtained: specimen A, 6.78+/-2.71 microm; B, 5.47+/-3.39 microm; C, 6.06+/-3.18 microm; D, 5.43+/-2.58 microm; E 4.78+/-2.57 microm, and F 0.66+/-1.11 micro;m. Analysis of variance revealed a significant influence of remineralization period on abrasive wear. However, even after a remineralization period of 60 min the wear was significantly increased as compared to the demineralized, but not brushed control. It is concluded that (1) abrasion resistance of softened enamel increases with remineralization period and (2) at least 60 min should elapse before toothbrushing after an erosive attack.

About this research paper

What this paper is about

The aim of the present in situ study was to evaluate the effect of different periods of intraoral remineralization to decrease the susceptibility of previously demineralized enamel against toothbrushing abrasion. Six human enamel specimens (A-F) were recessed in the buccal aspects of each of eight intraoral appliances which were worn for 21 days by 8 panelists. Demineralization of the samples was performed twice a day extraorally in the acidic beverage Sprite Light for 90 s. Subsequently, the enamel specimens were brushed at different times. Specimen A was brushed immediately after the demineralization. The remaining samples B-E were brushed after the intraoral appliances had been worn for various periods of remineralization: specimen B, 10 min; C, 20 min; D, 30 min and E, 60 min, respectively. Specimen F was only demineralized and remineralized, but not brushed. After 21 days, enamel wear was measured with a laser profilometer. The following values (mean +/- standard deviation) were obtained: specimen A, 6.78+/-2.71 microm; B, 5.47+/-3.39 microm; C, 6.06+/-3.18 microm; D, 5.43+/-2.58 microm; E 4.78+/-2.57 microm, and F 0.66+/-1.11 micro;m. Analysis of variance revealed a significant influence of remineralization period on abrasive wear. However, even after a remineralization period of 60 min the wear was significantly increased as compared to the demineralized, but not brushed control. It is concluded that (1) abrasion resistance of softened enamel increases with remineralization period and (2) at least 60 min should elapse before toothbrushing after an erosive attack.

Why it matters

OpenAlex reports 209 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The aim of the present in situ study was to evaluate the effect of different periods of intraoral remineralization to decrease the susceptibility of previously demineralized enamel against toothbrushing abrasion. Six human enamel specimens (A-F) were recessed in the buccal aspects of each of eight intraoral appliances which were worn for 21 days by 8 panelists. Demineralization of the samples was performed twice a day extraorally in the acidic beverage Sprite Light for 90 s. Subsequently, the enamel specimens were brushed at different times. Specimen A was brushed immediately after the demineralization. The remaining samples B-E were brushed after the intraoral appliances had been worn for various periods of remineralization: specimen B, 10 min; C, 20 min; D, 30 min and E, 60 min, respectively. Specimen F was only demineralized and remineralized, but not brushed. After 21 days, enamel wear was measured with a laser profilometer. The following values (mean +/- standard deviation) were obtained: specimen A, 6.78+/-2.71 microm; B, 5.47+/-3.39 microm; C, 6.06+/-3.18 microm; D, 5.43+/-2.58 microm; E 4.78+/-2.57 microm, and F 0.66+/-1.11 micro;m. Analysis of variance revealed a significant influence of remineralization period on abrasive wear. However, even after a remineralization period of 60 min the wear was significantly increased as compared to the demineralized, but not brushed control. It is concluded that (1) abrasion resistance of softened enamel increases with remineralization period and (2) at least 60 min should elapse before toothbrushing after an erosive attack.

Key concepts: Remineralisation, Enamel paint, Abrasion (mechanical), Dentistry, Tooth Remineralization, Demineralization, In situ, Dental enamel

Related papers

Back to paper searchBrowse research topicsOriginal source
In situ Evaluation of Different Remineralization Periods to Decrease Brushing Abrasion of Demineralized Enamel — Research Paper | ScholarLens