Optimal Design Methodology for Multi-Component Mooring Systems in Deep Water

Multi-component mooring systems, one of the crucial equipments of offshore platforms, play an important role in deep water oil&gas production because of relative low cost and light weight. A single mooring line can be constructed by combination of wire ropes, chains, fiber ropes, buoys and connectors etc. and provide adequate restoring force at fairlead point of platforms. Although the static and dynamic analyzing approaches for a determined multi-component system have been studied already, it is still hard to design and predetermine an appropriate mooring system that can satisfy the codes with multi-component lines. Referred to the conventional mooring system design method, this paper brings out an optimal design methodology for multi-component mooring systems. According to quasi-static method, at extreme offset position of the platform, an optimization model for designing the multi-component mooring line with biggest tension in deep water has been provided. Then, with the aid of design wave method and morison equation, a finite element model has been used to calculate mooring line dynamics at each fairlead point in time domain. The nonlinear interaction of mooring lines and seabed has also been investigated. Heave and surge of the platform have also been considered. Both 2D and 3D mooring system models have been built to search the interference of the lines and directional influence of environment loads like current and wave. The paper applied this set of analyzing methods and processes into a deep water semisubmersible serving at South China Sea. Compared with the results calculated by other software, the methodology mentioned in the paper got similar result with less weight and bigger restoring force.