Physical Characteristics of Maize Cob Briquette under Moderate Die Pressure
Patomsok Wilaipon
Abstract
Patomsok Wilaipon
Abstract
The potential energy content of maize cob available in Thailand was calculated based on maize productivity, the residue-to-product ratio and the heating value of maize cob. It was found that the computed value was about 74.2 PJ/year. Besides, the potential energy value exceed 1,000 TJ/year was also reported for the case of five provinces of Thailand. Concerning with maize cob briquette, the effect of molasses binder ratio and briquetting pressure on briquette density was experimentally investigated. It was found that the density of the briquettes was strongly influenced by the two factors. Moreover, a relationship between these factors over the studied range was also developed and validated. Thermogravimetric investigation was also carried out. The results showed that the maximum mass loss of maize cob occurred at the temperature of about 353oC. Finally, according to the ultimate analysis of the material, it was found that the maize cob used in the experiment is comprised of 40.50% carbon, 5.68% hydrogen and 0.37% hydrogen, respectively.
OpenAlex reports 71 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
The potential energy content of maize cob available in Thailand was calculated based on maize productivity, the residue-to-product ratio and the heating value of maize cob. It was found that the computed value was about 74.2 PJ/year. Besides, the potential energy value exceed 1,000 TJ/year was also reported for the case of five provinces of Thailand. Concerning with maize cob briquette, the effect of molasses binder ratio and briquetting pressure on briquette density was experimentally investigated. It was found that the density of the briquettes was strongly influenced by the two factors. Moreover, a relationship between these factors over the studied range was also developed and validated. Thermogravimetric investigation was also carried out. The results showed that the maximum mass loss of maize cob occurred at the temperature of about 353oC. Finally, according to the ultimate analysis of the material, it was found that the maize cob used in the experiment is comprised of 40.50% carbon, 5.68% hydrogen and 0.37% hydrogen, respectively.
Key concepts: Briquette, Die (integrated circuit), Materials science, Forensic engineering, Engineering, Mechanical engineering, Waste management, Coal