Screen-Type Energy Dissipator for Hydraulic Structures
N. Rajaratnam, K. I. Hurtig
Abstract
N. Rajaratnam, K. I. Hurtig
Abstract
Laboratory experiments have shown that screens or porous baffles with a porosity of about 40% could be used as effective energy dissipators below small hydraulic structures, either in a single wall or a double wall mode. The experiments were carried out for a range of supercritical Froude numbers F1 from about 4 to 13, and the relative energy dissipation was appreciably larger than that produced by the corresponding classical hydraulic jumps. These screens or porous baffles produced free hydraulic jumps, forced hydraulic jumps, and in some cases submerged jumps. The flow leaving these screens was found to be supercritical with a Froude number approximately equal to 1.65 and a tailwater depth equal to 0.28 times the subcritical sequent depth y2* of the classical hydraulic jump with the same F1. To produce a secondary jump downstream of the screens, the tailwater depth needed was found to be about one half of y2*.
OpenAlex reports 52 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Laboratory experiments have shown that screens or porous baffles with a porosity of about 40% could be used as effective energy dissipators below small hydraulic structures, either in a single wall or a double wall mode. The experiments were carried out for a range of supercritical Froude numbers F1 from about 4 to 13, and the relative energy dissipation was appreciably larger than that produced by the corresponding classical hydraulic jumps. These screens or porous baffles produced free hydraulic jumps, forced hydraulic jumps, and in some cases submerged jumps. The flow leaving these screens was found to be supercritical with a Froude number approximately equal to 1.65 and a tailwater depth equal to 0.28 times the subcritical sequent depth y2* of the classical hydraulic jump with the same F1. To produce a secondary jump downstream of the screens, the tailwater depth needed was found to be about one half of y2*.
Key concepts: Hydraulic jump, Tailwater, Froude number, Baffle, Dissipation, Supercritical flow, Mechanics, Hydraulics