ScholarLens Back to search
2014•Advanced materials researchRequires access

Finite Element Modeling of the Effect of Tool Rake Angle on Cutting Force and Tool Temperature during High Speed Machining of AISI 1045 Steel

Sreenivasan Sulaiman, Mohd Khairol Anuar Mohd Ariffin, A. Roshan

Open publisher page 4 citations

Abstract

A finite element model (FEM) of an orthogonal metal-cutting process is used to study the influence of tool rake angle on the cutting force and tool temperature. The model involves Johnson-Cook material model and Coulomb’s friction law. A tool rake angle ranging from 0° to 20° and a cutting speed ranging from 300 to 600 m/min were considered in this simulation. The results of this simulation work are consistent optimum tool rake angle for high speed machining (HSM) of AISI 1045 medium carbon steel. It was observed that there was a suitable rake angle between 10° and 18° for cutting speeds of 300 and 433 m/min where cutting force and temperature were lowest. However, there was not optimum rake angle for cutting speeds of 550 and 600 m/min. This paper can contribute in optimization of cutting tool for metal cutting process.

About this research paper

What this paper is about

A finite element model (FEM) of an orthogonal metal-cutting process is used to study the influence of tool rake angle on the cutting force and tool temperature. The model involves Johnson-Cook material model and Coulomb’s friction law. A tool rake angle ranging from 0° to 20° and a cutting speed ranging from 300 to 600 m/min were considered in this simulation. The results of this simulation work are consistent optimum tool rake angle for high speed machining (HSM) of AISI 1045 medium carbon steel. It was observed that there was a suitable rake angle between 10° and 18° for cutting speeds of 300 and 433 m/min where cutting force and temperature were lowest. However, there was not optimum rake angle for cutting speeds of 550 and 600 m/min. This paper can contribute in optimization of cutting tool for metal cutting process.

Why it matters

OpenAlex reports 4 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

A finite element model (FEM) of an orthogonal metal-cutting process is used to study the influence of tool rake angle on the cutting force and tool temperature. The model involves Johnson-Cook material model and Coulomb’s friction law. A tool rake angle ranging from 0° to 20° and a cutting speed ranging from 300 to 600 m/min were considered in this simulation. The results of this simulation work are consistent optimum tool rake angle for high speed machining (HSM) of AISI 1045 medium carbon steel. It was observed that there was a suitable rake angle between 10° and 18° for cutting speeds of 300 and 433 m/min where cutting force and temperature were lowest. However, there was not optimum rake angle for cutting speeds of 550 and 600 m/min. This paper can contribute in optimization of cutting tool for metal cutting process.

Key concepts: Rake angle, Finite element method, Materials science, Rake, Machining, Mechanical engineering, Tool wear, Carbon steel

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
Finite Element Modeling of the Effect of Tool Rake Angle on Cutting Force and Tool Temperature during High Speed Machining of AISI 1045 Steel — Research Paper | ScholarLens