Ce-Doped ZnO Based Fast Response UV Photoconductive Detector
Hong Di Zhang, Xiao Wei Sai, Xiang Cheng, Fang Cheng, Ling Wang, Yun‐Ze Long, Yi Chen Liu
Abstract
Hong Di Zhang, Xiao Wei Sai, Xiang Cheng, Fang Cheng, Ling Wang, Yun‐Ze Long, Yi Chen Liu
Abstract
A metal-semiconductor-metal photoconductive detector was fabricated using Ce-doped ZnO nanofibers synthesized by electrospinning and calcinations. UV photocurrents were carried out to study optoelectronic properties of Ce-doped ZnO nanofibers. The current-voltage (I–V) characteristics of photodetector device were analyzed under different wavelength UV illumination. The photocurrent increased by about 300 times under UV illumination. Results showed that the photocurrent of the device increased with the decrease of the wavelengths. A maximum photocurrent and photo-responsivity was observed at 365 nm, 308 nm, 254nm, respectively, under 30 V bias. The response and recovery time of the nanofibers was 16 s and 16 s at 365 nm, 10 s and 12 s at 308nm, 4 s and3 s at 254nm under 30 V bias, respectively.
OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
A metal-semiconductor-metal photoconductive detector was fabricated using Ce-doped ZnO nanofibers synthesized by electrospinning and calcinations. UV photocurrents were carried out to study optoelectronic properties of Ce-doped ZnO nanofibers. The current-voltage (I–V) characteristics of photodetector device were analyzed under different wavelength UV illumination. The photocurrent increased by about 300 times under UV illumination. Results showed that the photocurrent of the device increased with the decrease of the wavelengths. A maximum photocurrent and photo-responsivity was observed at 365 nm, 308 nm, 254nm, respectively, under 30 V bias. The response and recovery time of the nanofibers was 16 s and 16 s at 365 nm, 10 s and 12 s at 308nm, 4 s and3 s at 254nm under 30 V bias, respectively.
Key concepts: Photocurrent, Photoconductivity, Materials science, Responsivity, Optoelectronics, Photodetector, Doping, Nanofiber