1992ReproductionOpen access

Successful cryopreservation of mouse blastocysts using a new vitrification solution

Conrado A. Valdez, O. Abas Mazni, Yoshiyuki Takahashi, S. Fujikawa, Hiroshi Kanagawa

Open full text 51 citations

Abstract

Mouse blastocysts were exposed to solutions containing four concentrations (10, 20, 30 and 40% v/v) of six permeating cryoprotectants (glycerol, ethylene glycol, propylene glycol, dimethyl sulfoxide, 1,3-butanediol and 2,3-butanediol) in phosphate-buffered saline (PBS) with calf serum (CS) at room temperature (20-22 degrees C). Blastocysts were exposed to these solutions for various periods, diluted into PBS plus CS with or without 1 mol trehalose l-1 solution and their subsequent survival in vitro was examined. Two-way anova showed a significant interaction (P < 0.01) between cryoprotectant type, concentration of cryoprotectant and method of dilution. However, no significant interaction was observed between cryoprotectant type and duration of exposure. Results suggest that cryoprotectant-induced injury to nonfrozen blastocysts is variable and depends on the cryoprotectant used. On the basis of toxicity assays, ethylene glycol was the least harmful and was combined with dimethyl sulfoxide and 1,3-butanediol to produce a new vitrification solution. Mouse blastocysts were successfully cryopreserved using a vitrification solution (designated as VSv) consisting of 20% ethylene glycol, 20% dimethyl sulfoxide and 10% 1,3-butanediol (v/v). Embryos were equilibrated in two steps, first in an equilibration solution (designated as ESv: 10% ethylene glycol, 10% dimethyl sulfoxide and 5% 1,3-butanediol; v/v) and then to VSv or one-step in VSv at different exposure times at room temperature, and then vitrified by direct plunging into liquid nitrogen. High developmental rates were obtained in vitro when the embryos were exposed to ESv and VSv for 3 and 0.5 min, respectively (96.2%) or exposed to VSv for 0.5 min (95.4%). Prolonged exposure time proved detrimental to subsequent embryo development in vitro. When vitrified warmed embryos were transferred immediately to pseudopregnant recipients, the rate of development to normal fetuses did not significantly differ from that of the nonvitrified control (two-step, 54.2 and one-step, 45.0 versus 60.0%, P > 0.05). These results suggest that the simple vitrification solution described in this study is effective for the cryopreservation of mouse blastocysts.

Open-access reader

About this research paper

What this paper is about

Mouse blastocysts were exposed to solutions containing four concentrations (10, 20, 30 and 40% v/v) of six permeating cryoprotectants (glycerol, ethylene glycol, propylene glycol, dimethyl sulfoxide, 1,3-butanediol and 2,3-butanediol) in phosphate-buffered saline (PBS) with calf serum (CS) at room temperature (20-22 degrees C). Blastocysts were exposed to these solutions for various periods, diluted into PBS plus CS with or without 1 mol trehalose l-1 solution and their subsequent survival in vitro was examined. Two-way anova showed a significant interaction (P < 0.01) between cryoprotectant type, concentration of cryoprotectant and method of dilution. However, no significant interaction was observed between cryoprotectant type and duration of exposure. Results suggest that cryoprotectant-induced injury to nonfrozen blastocysts is variable and depends on the cryoprotectant used. On the basis of toxicity assays, ethylene glycol was the least harmful and was combined with dimethyl sulfoxide and 1,3-butanediol to produce a new vitrification solution. Mouse blastocysts were successfully cryopreserved using a vitrification solution (designated as VSv) consisting of 20% ethylene glycol, 20% dimethyl sulfoxide and 10% 1,3-butanediol (v/v). Embryos were equilibrated in two steps, first in an equilibration solution (designated as ESv: 10% ethylene glycol, 10% dimethyl sulfoxide and 5% 1,3-butanediol; v/v) and then to VSv or one-step in VSv at different exposure times at room temperature, and then vitrified by direct plunging into liquid nitrogen. High developmental rates were obtained in vitro when the embryos were exposed to ESv and VSv for 3 and 0.5 min, respectively (96.2%) or exposed to VSv for 0.5 min (95.4%). Prolonged exposure time proved detrimental to subsequent embryo development in vitro. When vitrified warmed embryos were transferred immediately to pseudopregnant recipients, the rate of development to normal fetuses did not significantly differ from that of the nonvitrified control (two-step, 54.2 and one-step, 45.0 versus 60.0%, P > 0.05). These results suggest that the simple vitrification solution described in this study is effective for the cryopreservation of mouse blastocysts.

Why it matters

OpenAlex reports 51 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Mouse blastocysts were exposed to solutions containing four concentrations (10, 20, 30 and 40% v/v) of six permeating cryoprotectants (glycerol, ethylene glycol, propylene glycol, dimethyl sulfoxide, 1,3-butanediol and 2,3-butanediol) in phosphate-buffered saline (PBS) with calf serum (CS) at room temperature (20-22 degrees C). Blastocysts were exposed to these solutions for various periods, diluted into PBS plus CS with or without 1 mol trehalose l-1 solution and their subsequent survival in vitro was examined. Two-way anova showed a significant interaction (P < 0.01) between cryoprotectant type, concentration of cryoprotectant and method of dilution. However, no significant interaction was observed between cryoprotectant type and duration of exposure. Results suggest that cryoprotectant-induced injury to nonfrozen blastocysts is variable and depends on the cryoprotectant used. On the basis of toxicity assays, ethylene glycol was the least harmful and was combined with dimethyl sulfoxide and 1,3-butanediol to produce a new vitrification solution. Mouse blastocysts were successfully cryopreserved using a vitrification solution (designated as VSv) consisting of 20% ethylene glycol, 20% dimethyl sulfoxide and 10% 1,3-butanediol (v/v). Embryos were equilibrated in two steps, first in an equilibration solution (designated as ESv: 10% ethylene glycol, 10% dimethyl sulfoxide and 5% 1,3-butanediol; v/v) and then to VSv or one-step in VSv at different exposure times at room temperature, and then vitrified by direct plunging into liquid nitrogen. High developmental rates were obtained in vitro when the embryos were exposed to ESv and VSv for 3 and 0.5 min, respectively (96.2%) or exposed to VSv for 0.5 min (95.4%). Prolonged exposure time proved detrimental to subsequent embryo development in vitro. When vitrified warmed embryos were transferred immediately to pseudopregnant recipients, the rate of development to normal fetuses did not significantly differ from that of the nonvitrified control (two-step, 54.2 and one-step, 45.0 versus 60.0%, P > 0.05). These results suggest that the simple vitrification solution described in this study is effective for the cryopreservation of mouse blastocysts.

Key concepts: Cryoprotectant, Dimethyl sulfoxide, Ethylene glycol, Cryopreservation, Glycerol, Chemistry, Vitrification, Chromatography

Related papers

Back to paper searchBrowse research topicsOriginal source
Successful cryopreservation of mouse blastocysts using a new vitrification solution — Research Paper | ScholarLens