2011•Advanced materials researchOpen access

Effect of Hot-Water Pre-Extraction on Alkaline Pulping Properties of Wheat Straw

Su Feng Zhang, Heng Yang

Open full text 8 citations

Abstract

The alkaline pulping properties of wheat straw, which had been hemicelluloses pre-extracted with hot water, were studied. In this work, the process of hot-water extraction at various temperatures, reaction time and other conditions were investigated. The straws pre-extracted or not were made into pulp with NaOH-AQ at same conditions. Then the effects of pre-extraction on properties of straw pulp were studied. The results show that the yield, Kappa number and viscosity of the pulp are affected significantly by hemicelluloses pre-extraction process. The chemicals charge of the extracted straw in the pulping process is lower and shorter cooking time needed, the maximum pulping temperature reduced. These effects indicate that the action of hot-water pre-extraction before alkaline pulping is able to reduce effluent discharge and chemical demand to pulp, and it would be energy-saving. In this experiment, the optimum conditions of hot-water pre-extraction were: maximum temperature 140°C, heat-up time 30min, time at maximum temperature 60min and liquor ratio 1:10. The optimal pulping conditions were: alkali charge 12%, maximum temperature 155°C, heat-up time 90min, and holding time at maximum temperature 60min.

About this research paper

What this paper is about

The alkaline pulping properties of wheat straw, which had been hemicelluloses pre-extracted with hot water, were studied. In this work, the process of hot-water extraction at various temperatures, reaction time and other conditions were investigated. The straws pre-extracted or not were made into pulp with NaOH-AQ at same conditions. Then the effects of pre-extraction on properties of straw pulp were studied. The results show that the yield, Kappa number and viscosity of the pulp are affected significantly by hemicelluloses pre-extraction process. The chemicals charge of the extracted straw in the pulping process is lower and shorter cooking time needed, the maximum pulping temperature reduced. These effects indicate that the action of hot-water pre-extraction before alkaline pulping is able to reduce effluent discharge and chemical demand to pulp, and it would be energy-saving. In this experiment, the optimum conditions of hot-water pre-extraction were: maximum temperature 140°C, heat-up time 30min, time at maximum temperature 60min and liquor ratio 1:10. The optimal pulping conditions were: alkali charge 12%, maximum temperature 155°C, heat-up time 90min, and holding time at maximum temperature 60min.

Why it matters

OpenAlex reports 8 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The alkaline pulping properties of wheat straw, which had been hemicelluloses pre-extracted with hot water, were studied. In this work, the process of hot-water extraction at various temperatures, reaction time and other conditions were investigated. The straws pre-extracted or not were made into pulp with NaOH-AQ at same conditions. Then the effects of pre-extraction on properties of straw pulp were studied. The results show that the yield, Kappa number and viscosity of the pulp are affected significantly by hemicelluloses pre-extraction process. The chemicals charge of the extracted straw in the pulping process is lower and shorter cooking time needed, the maximum pulping temperature reduced. These effects indicate that the action of hot-water pre-extraction before alkaline pulping is able to reduce effluent discharge and chemical demand to pulp, and it would be energy-saving. In this experiment, the optimum conditions of hot-water pre-extraction were: maximum temperature 140°C, heat-up time 30min, time at maximum temperature 60min and liquor ratio 1:10. The optimal pulping conditions were: alkali charge 12%, maximum temperature 155°C, heat-up time 90min, and holding time at maximum temperature 60min.

Key concepts: Kappa number, Pulp (tooth), Pulp and paper industry, Straw, Extraction (chemistry), Soda pulping, Effluent, Hot water extraction

Related papers

Back to paper searchBrowse research topicsOriginal source
Effect of Hot-Water Pre-Extraction on Alkaline Pulping Properties of Wheat Straw — Research Paper | ScholarLens