Effect of σ phase on pitting corrosion of 22-5 duplex stainless steel
F. Elshawesh, N. ELAHRESH, A. Elhoud
Abstract
F. Elshawesh, N. ELAHRESH, A. Elhoud
Abstract
AbstractThe effect of σ phase content on the pitting potential of 22-5 duplex stainless steel has been investigated in aqueous solutions of O·6M NaCl, with and without nitrogen purging, at both room temperature (22°C) and 80°C. A scratching technique was used to simulate the type of mechanical damage that may occur during service, resulting in localised attack due to disruption of the passive film, particularly in chloride containing environments. The amount of σ phase in the test specimens was varied up to a maximum of 18% by thermal treatment at 850°C for periods of time of up to 3 h to simulate microstructural changes due to welding. The test results showed that σ phase markedly decreases the pitting potential of 22-5 duplex stainless steel at both 22 and 80°C. Furthermore, the extent to which σ phase reduced the pitting potential was found to be strongly temperature dependent, being more pronounced at the higher temperature. Indeed, the increase in test temperature had a greater effect on the pitting ...
OpenAlex reports 12 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
AbstractThe effect of σ phase content on the pitting potential of 22-5 duplex stainless steel has been investigated in aqueous solutions of O·6M NaCl, with and without nitrogen purging, at both room temperature (22°C) and 80°C. A scratching technique was used to simulate the type of mechanical damage that may occur during service, resulting in localised attack due to disruption of the passive film, particularly in chloride containing environments. The amount of σ phase in the test specimens was varied up to a maximum of 18% by thermal treatment at 850°C for periods of time of up to 3 h to simulate microstructural changes due to welding. The test results showed that σ phase markedly decreases the pitting potential of 22-5 duplex stainless steel at both 22 and 80°C. Furthermore, the extent to which σ phase reduced the pitting potential was found to be strongly temperature dependent, being more pronounced at the higher temperature. Indeed, the increase in test temperature had a greater effect on the pitting ...
Key concepts: Pitting corrosion, Duplex (building), Corrosion, Materials science, Metallurgy, Phase (matter), Chemistry, DNA