ScholarLens Back to search
2000•Separation Science and TechnologyRequires access

Transient- and Steady-State Concentration Profiles in a DIAMEX-like Countercurrent Process for An(III) + Ln(III) Separation

Alessandro Facchini, Letizia Amato, Giuseppe Modolo, R. Nannicini, C. Madic, P. Baron

Open publisher page 20 citations

Abstract

A new version of the DIAMEX (DIAMide EXtraction) process is reported to separate trivalent Am,Cm (An) and lanthanides (Ln) from a PUREX (Plutonium Uranium Refining by EXtraction by tributyl phosphate) process raffinate at a high aqueous/extractant flow-rate ratio while taking care of prevent third-phase formation. The process has been modeled by a computer program and tested on a 16-stage mixer/settler battery to perform extraction, scrubbing, and stripping to obtain an Am (representing the mixture of Am + Cm) decontamination factor (feed/raffinate) higher than 103 and a Mo + Zr fission product content in the product lower than 1 wt% of that of Am. Transient and steady-state concentration profiles of the solutes have been calculated and experimentally determined, and good agreement was generally observed.

About this research paper

What this paper is about

A new version of the DIAMEX (DIAMide EXtraction) process is reported to separate trivalent Am,Cm (An) and lanthanides (Ln) from a PUREX (Plutonium Uranium Refining by EXtraction by tributyl phosphate) process raffinate at a high aqueous/extractant flow-rate ratio while taking care of prevent third-phase formation. The process has been modeled by a computer program and tested on a 16-stage mixer/settler battery to perform extraction, scrubbing, and stripping to obtain an Am (representing the mixture of Am + Cm) decontamination factor (feed/raffinate) higher than 103 and a Mo + Zr fission product content in the product lower than 1 wt% of that of Am. Transient and steady-state concentration profiles of the solutes have been calculated and experimentally determined, and good agreement was generally observed.

Why it matters

OpenAlex reports 20 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

A new version of the DIAMEX (DIAMide EXtraction) process is reported to separate trivalent Am,Cm (An) and lanthanides (Ln) from a PUREX (Plutonium Uranium Refining by EXtraction by tributyl phosphate) process raffinate at a high aqueous/extractant flow-rate ratio while taking care of prevent third-phase formation. The process has been modeled by a computer program and tested on a 16-stage mixer/settler battery to perform extraction, scrubbing, and stripping to obtain an Am (representing the mixture of Am + Cm) decontamination factor (feed/raffinate) higher than 103 and a Mo + Zr fission product content in the product lower than 1 wt% of that of Am. Transient and steady-state concentration profiles of the solutes have been calculated and experimentally determined, and good agreement was generally observed.

Key concepts: Raffinate, Chemistry, Tributyl phosphate, PUREX, Data scrubbing, Countercurrent exchange, Stripping (fiber), Plutonium

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
Transient- and Steady-State Concentration Profiles in a DIAMEX-like Countercurrent Process for An(III) + Ln(III) Separation — Research Paper | ScholarLens