1986•Journal of Geotechnical EngineeringRequires access

Measured Lateral Response of Mass on Single Pile in Clay

Geoffrey W. Blaney, Michael W. O‘Neill

Open publisher page 50 citations

Abstract

The results of dynamic lateral load tests on a cantilevered mass supported by a single 10.75‐in. (273‐mm) diameter steel pipe pile embedded in stiff, overconsolidated clay are presented. These tests were conducted to provide a basis for evaluation of mathematical models that predict the relatively low‐frequency dynamic pile response that is representative of systems in which the primary resonance frequency is controlled by the mass and stiffness of the superstructure. Frequency sweep shear forcing functions were applied at the top of the mass, which simulated a simple structure. The responses of the pilesupported mass, points on the embedded pile, and points in the supporting soil were recorded to determine frequency response functions. Frequency response functions between the applied load and pile cap‐mass were then examined to aid in the identification of the pile‐soil system parameters which most strongly influence response. The measured pile cap frequency response function peak amplitude was 0.0022 in./lb (0.0126 mm/N), or about ten times the static flexibility, and the resonance frequency was approximately 2.2 Hz.

About this research paper

What this paper is about

The results of dynamic lateral load tests on a cantilevered mass supported by a single 10.75‐in. (273‐mm) diameter steel pipe pile embedded in stiff, overconsolidated clay are presented. These tests were conducted to provide a basis for evaluation of mathematical models that predict the relatively low‐frequency dynamic pile response that is representative of systems in which the primary resonance frequency is controlled by the mass and stiffness of the superstructure. Frequency sweep shear forcing functions were applied at the top of the mass, which simulated a simple structure. The responses of the pilesupported mass, points on the embedded pile, and points in the supporting soil were recorded to determine frequency response functions. Frequency response functions between the applied load and pile cap‐mass were then examined to aid in the identification of the pile‐soil system parameters which most strongly influence response. The measured pile cap frequency response function peak amplitude was 0.0022 in./lb (0.0126 mm/N), or about ten times the static flexibility, and the resonance frequency was approximately 2.2 Hz.

Why it matters

OpenAlex reports 50 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The results of dynamic lateral load tests on a cantilevered mass supported by a single 10.75‐in. (273‐mm) diameter steel pipe pile embedded in stiff, overconsolidated clay are presented. These tests were conducted to provide a basis for evaluation of mathematical models that predict the relatively low‐frequency dynamic pile response that is representative of systems in which the primary resonance frequency is controlled by the mass and stiffness of the superstructure. Frequency sweep shear forcing functions were applied at the top of the mass, which simulated a simple structure. The responses of the pilesupported mass, points on the embedded pile, and points in the supporting soil were recorded to determine frequency response functions. Frequency response functions between the applied load and pile cap‐mass were then examined to aid in the identification of the pile‐soil system parameters which most strongly influence response. The measured pile cap frequency response function peak amplitude was 0.0022 in./lb (0.0126 mm/N), or about ten times the static flexibility, and the resonance frequency was approximately 2.2 Hz.

Key concepts: Pile, Pile cap, Frequency response, Geotechnical engineering, Stiffness, Sweep frequency response analysis, Structural engineering, Response analysis

Related papers

Back to paper searchBrowse research topicsOriginal source
Measured Lateral Response of Mass on Single Pile in Clay — Research Paper | ScholarLens