Experimental of Wood Gasification in Suction Biomass Gasifier
Muhammad Iqbal Ahmad, Zainal Alimuddin Zainal Alauddin, Shahril Nizam Mohamed Soid, Mohamed Mazlan, Mohd Huzaifah Yusoff
Abstract
Muhammad Iqbal Ahmad, Zainal Alimuddin Zainal Alauddin, Shahril Nizam Mohamed Soid, Mohamed Mazlan, Mohd Huzaifah Yusoff
Abstract
Biomass is one of the alternatives energy which are abundant, relatively cheap, and widespread availability. This paper is aim to show the process finding according experimental work of wood using suction biomass gasifier. Energy can be extracted from biomass through gasification process. The experiment focuses on woody gasification. A suction biomass gasifier has been built and operated under stable condition which fueled from wood waste and air as gasifying agent. The biomass feeding rate was varied from 3 to 5.5kg/hr. Result show that producer gas contains CO in 20-30% in volume and H2 found to be varying between 14 and16% vol. The low heating value (LHV) from this woody gasification around 4-5 MJ/Nm3. Carbon conversion efficiency also measured as a parameter to indicate biomass-gas conversion.
OpenAlex reports 3 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Biomass is one of the alternatives energy which are abundant, relatively cheap, and widespread availability. This paper is aim to show the process finding according experimental work of wood using suction biomass gasifier. Energy can be extracted from biomass through gasification process. The experiment focuses on woody gasification. A suction biomass gasifier has been built and operated under stable condition which fueled from wood waste and air as gasifying agent. The biomass feeding rate was varied from 3 to 5.5kg/hr. Result show that producer gas contains CO in 20-30% in volume and H2 found to be varying between 14 and16% vol. The low heating value (LHV) from this woody gasification around 4-5 MJ/Nm3. Carbon conversion efficiency also measured as a parameter to indicate biomass-gas conversion.
Key concepts: Wood gas generator, Biomass (ecology), Volume (thermodynamics), Pulp and paper industry, Environmental science, Waste management, Heat of combustion, Suction