2015•International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)Requires access
Powder metallurgy of high speed-steel produced by solid state sintering and heat treatment
Dan Zhang, Zhi Li, Lang Xie, Yifeng Xiao, Fucheng Yin
Open publisher page 8 citations
Abstract
Abstract High-speed steel is successfully fabricated by solid state sintering of Fe, Co, WC, Mo2C, Cr3C2 and VC powders under vacuum. The sintering density, microstructure, phase structure, hardness, and transverse rupture strength of the specimens are examined. Results show that the density increases with increasing sintering temperature. Nearly full density is obtained without microstructural coarsening in the sintering temperature range of 1190–1210°C. The optimum sintering temperature for the steel is 1200°C. The suitable quenching temperatures range from 1200 to 1240°C. After heat treatments, the microstructure consists of a martensitic matrix (grain size ≈5 μm) with a homogeneous distribution of MC and M 6C carbides (average size lower than 1 μm). The highest hardness of 68.5 ± 0.3 HRC and the maximum transverse rupture strength of 3.58 ± 0.12 GPa is obtained for the specimen tempered at 560°C.