Continuous Cooling Transformation Behavior of X70 Pipeline Steel

The continuous cooling transformation behaviors were researched on X70 pipeline steel through two pass deformation and non-deformed austenite using Gleeble-3500 thermal mechanical simulator, and static continuous cooling transformation curve and dynamic continuous cooling transformation curve were measured through thermal dilation method and metallographic method. The influence of cooling rate and deformation parameters on microstructure was analyzed. The results show that the hot deformation accelerates the acicular ferrite and polygonal ferrite phase transformation, increases the starting transformation temperature and the finishing transformation temperature significantly, and shifts the CCT curve moving upward to the left side corner. Acicular ferrite is obtained in practice using accelerated cooling rate after deformation Acicular ferrite can be obtained in wider range of cooling rates, and microstructure and island structure is finer through hot deformation.