2011•Key engineering materialsOpen access

Microstructure of Laser Cladded Cobalt-Based Alloy Coating on T10 Tool Steel

Qian Zhao, Yong Kang Zhang, Cheng Yun Cui, Xi Cui, Jin Zhong Lu

Abstract

Co-based alloy coating was fabricated by powder feeding laser cladding on T10 tool steel. The microstructure and phase composition were investigated by scanning electron microscope (SEM) and X-ray diffractometer (XRD). The results showed that the different solidification microstructures on the section, such as planar, cellular and dendrite formed from the interface to the surface. The main phase γ-Co and another phase Cr23C6 existed in the original coating, however, the main phase γ-Co was unchanged, and another phase was replaced by Cr7C3 accompanying with Co3C and Co4B precipitations after aging treatment.

About this research paper

What this paper is about

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Key concepts: Microstructure, Materials science, Scanning electron microscope, Coating, Diffractometer, Alloy, Metallurgy, Phase (matter)