Contactless electroreflectance of InGaN layers with indium content ≤36%: The surface band bending, band gap bowing, and Stokes shift issues

Contactless electroreflectance (CER) supported by photoluminescence (PL) has been applied to study (i) the surface band bending, (ii) the band gap bowing, and (iii) the Stokes shift for InGaN layers grown by molecular beam epitaxy with 0.14≤In≤0.36. The type of surface band bending has been investigated on the basis of the shape of CER resonance. It has been found that the surface band bending changes from n-type for layers with low indium content (In<27%) to flatband (or weak p-type band) for layers with In∼35%. The band gap bowing has been determined to be 1.4±0.2 and 2.1±0.3 eV for CER data with and without strain corrections, respectively. From this analysis it has been concluded that the reliable value of the bowing parameter for unstrained InGaN should be between 1.4 and 2.1 eV. Comparing CER with PL data it has been found that the Stokes shift rises from 20 to 120 meV when the indium concentration increased from 14% to 36%. In addition, it has been observed that the intensity of PL from InGaN layers decreased exponentially with the increase in the indium content. The last two findings are attributed to an easier formation of native point defects and stronger indium segregation in InGaN alloys with higher indium concentrations.