2013Polymer Engineering and ScienceRequires access

Synthesis, Characterization, and swelling behaviors of acrylic acid/carboxymethyl cellulose superabsorbent hydrogel by glow‐discharge electrolysis plasma

Jie Yu, Gege Yang, Yun Li, Wu Yang, Jinzhang Gao, Quanfang Lu

Open publisher page 38 citations

Abstract

This article exploits a new approach for synthesis of acrylic acid/carboxymethyl cellulose (AA/CMC) superabsorbent hydrogel in aqueous solution by a simple one‐step using glow‐discharge electrolysis plasma, in which N , N ′‐methylenebisacrylamide (MBA) was used as a crosslinking agent. The reaction parameters affecting the equilibrium swelling, that is, discharge voltage, discharge time, mass ratio of AA to CMC, content of crosslinker, and degree of neutralization, were systematically optimized to achieve a superabsorbent hydrogel with a maximum equilibrium swelling. The structure, thermal stability, and morphology of AA/CMC superabsorbent hydrogel were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction analysis, thermogravimetric analysis, and scanning electron microscopy. The swelling kinetics in distilled water and swelling behaviors in various pH solutions and salts solutions (NaCl, KCl, MgCl 2 , CaCl 2 , AlCl 3 , and FeCl 3 ) were investigated in detail. The effect of six cationic salt solutions on the equilibrium swelling had the following order K + > Na + > Mg 2+ > Ca 2+ > Al 3+ > Fe 3+ . In addition, the pH‐reversibility was preliminarily investigated with alternating pH between 6.5 and 2.0. The results showed that the equilibrium swelling of AA/CMC was achieved in 90 min. The hydrogel was responsive to the pH and salts, and was reversible swelling and deswelling behavior. POLYM. ENG. SCI., 54:2310–2320, 2014. © 2013 Society of Plastics Engineers

About this research paper

What this paper is about

This article exploits a new approach for synthesis of acrylic acid/carboxymethyl cellulose (AA/CMC) superabsorbent hydrogel in aqueous solution by a simple one‐step using glow‐discharge electrolysis plasma, in which N , N ′‐methylenebisacrylamide (MBA) was used as a crosslinking agent. The reaction parameters affecting the equilibrium swelling, that is, discharge voltage, discharge time, mass ratio of AA to CMC, content of crosslinker, and degree of neutralization, were systematically optimized to achieve a superabsorbent hydrogel with a maximum equilibrium swelling. The structure, thermal stability, and morphology of AA/CMC superabsorbent hydrogel were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction analysis, thermogravimetric analysis, and scanning electron microscopy. The swelling kinetics in distilled water and swelling behaviors in various pH solutions and salts solutions (NaCl, KCl, MgCl 2 , CaCl 2 , AlCl 3 , and FeCl 3 ) were investigated in detail. The effect of six cationic salt solutions on the equilibrium swelling had the following order K + > Na + > Mg 2+ > Ca 2+ > Al 3+ > Fe 3+ . In addition, the pH‐reversibility was preliminarily investigated with alternating pH between 6.5 and 2.0. The results showed that the equilibrium swelling of AA/CMC was achieved in 90 min. The hydrogel was responsive to the pH and salts, and was reversible swelling and deswelling behavior. POLYM. ENG. SCI., 54:2310–2320, 2014. © 2013 Society of Plastics Engineers

Why it matters

OpenAlex reports 38 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

This article exploits a new approach for synthesis of acrylic acid/carboxymethyl cellulose (AA/CMC) superabsorbent hydrogel in aqueous solution by a simple one‐step using glow‐discharge electrolysis plasma, in which N , N ′‐methylenebisacrylamide (MBA) was used as a crosslinking agent. The reaction parameters affecting the equilibrium swelling, that is, discharge voltage, discharge time, mass ratio of AA to CMC, content of crosslinker, and degree of neutralization, were systematically optimized to achieve a superabsorbent hydrogel with a maximum equilibrium swelling. The structure, thermal stability, and morphology of AA/CMC superabsorbent hydrogel were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction analysis, thermogravimetric analysis, and scanning electron microscopy. The swelling kinetics in distilled water and swelling behaviors in various pH solutions and salts solutions (NaCl, KCl, MgCl 2 , CaCl 2 , AlCl 3 , and FeCl 3 ) were investigated in detail. The effect of six cationic salt solutions on the equilibrium swelling had the following order K + > Na + > Mg 2+ > Ca 2+ > Al 3+ > Fe 3+ . In addition, the pH‐reversibility was preliminarily investigated with alternating pH between 6.5 and 2.0. The results showed that the equilibrium swelling of AA/CMC was achieved in 90 min. The hydrogel was responsive to the pH and salts, and was reversible swelling and deswelling behavior. POLYM. ENG. SCI., 54:2310–2320, 2014. © 2013 Society of Plastics Engineers

Key concepts: Swelling, Carboxymethyl cellulose, Acrylic acid, Materials science, Aqueous solution, Thermogravimetric analysis, Distilled water, Polymer chemistry

Related papers

Back to paper searchBrowse research topicsOriginal source
Synthesis, Characterization, and swelling behaviors of acrylic acid/carboxymethyl cellulose superabsorbent hydrogel by glow‐discharge electrolysis plasma — Research Paper | ScholarLens