선회 예혼합 연소기의 오염물질 배출 특성
김동춘, 이승로, 이창언
Abstract
김동춘, 이승로, 이창언
Abstract
In this study, the experimental study about the flame stability and combustion characteristics of premixed swirl burner with varying combustor diameters and conditions were investigated using a model combustor. As results, the open flames without a combustor had a higher bulk velocity and a wider flame stability region at high equivalence ratio than those at low equivalence ratio, and the flame stability region was dominated by an equivalence ratio rather than a swirl number. However, when the combustor was installed, the bulk velocity and flame stability region were decreased and narrowed as the equivalence ratio increased. In addition, the smallest combustor diameter had the highest NOx and CO emission for an adiabatic condition. However, when the heat exchanger was installed on the combustor wall, NOx and CO was reduced largely for the smallest diameter due to heat loss effect.
A significance statement is not available in the OpenAlex record.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
In this study, the experimental study about the flame stability and combustion characteristics of premixed swirl burner with varying combustor diameters and conditions were investigated using a model combustor. As results, the open flames without a combustor had a higher bulk velocity and a wider flame stability region at high equivalence ratio than those at low equivalence ratio, and the flame stability region was dominated by an equivalence ratio rather than a swirl number. However, when the combustor was installed, the bulk velocity and flame stability region were decreased and narrowed as the equivalence ratio increased. In addition, the smallest combustor diameter had the highest NOx and CO emission for an adiabatic condition. However, when the heat exchanger was installed on the combustor wall, NOx and CO was reduced largely for the smallest diameter due to heat loss effect.
Key concepts: Combustor, Equivalence ratio, Combustion, NOx, Mechanics, Materials science, Adiabatic flame temperature, Adiabatic process