LD-pumped 6W cw Tm 3+ -Doped Silica Double-Cladding Fibre Laser
Geguo Du, LI Da-Jun, Min Zhang, Peiguang Yan, Chen Li-Cheng, Zhou Yao Hua, Ruan Shuang-Chen
Abstract
Open-access reader
Geguo Du, LI Da-Jun, Min Zhang, Peiguang Yan, Chen Li-Cheng, Zhou Yao Hua, Ruan Shuang-Chen
Abstract
Open-access reader
We report a thulium-doped silica fibre laser that generates a maximum cw output power of 6W in a 2μm wavelength range when cladding-pumped by a laser diode (LD) operating at approximately 791 nm at room temperature. The slope efficiency with respect to the launched pump power is 50% and 38.4%, with and without an output coupler mirror, respectively. The corresponding thresholds are 2.8 W and 4.8 W, respectively. The beam qualities M x 2 and M y 2 are 1.26 and 1.32, respectively. The experimental results are also analysed.
OpenAlex reports 5 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
We report a thulium-doped silica fibre laser that generates a maximum cw output power of 6W in a 2μm wavelength range when cladding-pumped by a laser diode (LD) operating at approximately 791 nm at room temperature. The slope efficiency with respect to the launched pump power is 50% and 38.4%, with and without an output coupler mirror, respectively. The corresponding thresholds are 2.8 W and 4.8 W, respectively. The beam qualities M x 2 and M y 2 are 1.26 and 1.32, respectively. The experimental results are also analysed.
Key concepts: Materials science, Cladding (metalworking), Doping, Laser, Fiber laser, Optics, Optoelectronics, Composite material