Elements of Median Design in Relation to Accident Occurrence
Gordon R. Garner, Robert C. Deen
Abstract
Open-access reader
Gordon R. Garner, Robert C. Deen
Abstract
Open-access reader
The purpose of this study was to compare the accident histories of different median types and to provide verification of generally recommended median widths and slopes. A major limitation of the analyses was the small number of possible combinations of median width and cross slope available for study. The analyses reported provided evidence from accident histories to support the general requirement that wider medians are safer medians. It was indicated that medians should be a minimum of 30-40 feet wide for high speed facilities and that flat slopes should be provided; 4:1 slopes are inadequate for medians less than 60 feet wide. There was an indication that 6:1 or flatter slopes should be used. Raised medians provided an unsuitable vehicle recovery area on rural highways and were also undesirable from the standpoint of roadway surface drainage. The irregular interstate medians which result from independent roadway alignment should be used only with adequate clear zones in the median. Twelve-foot shoulders should be provided where guardrail is to be used.
OpenAlex reports 10 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
The purpose of this study was to compare the accident histories of different median types and to provide verification of generally recommended median widths and slopes. A major limitation of the analyses was the small number of possible combinations of median width and cross slope available for study. The analyses reported provided evidence from accident histories to support the general requirement that wider medians are safer medians. It was indicated that medians should be a minimum of 30-40 feet wide for high speed facilities and that flat slopes should be provided; 4:1 slopes are inadequate for medians less than 60 feet wide. There was an indication that 6:1 or flatter slopes should be used. Raised medians provided an unsuitable vehicle recovery area on rural highways and were also undesirable from the standpoint of roadway surface drainage. The irregular interstate medians which result from independent roadway alignment should be used only with adequate clear zones in the median. Twelve-foot shoulders should be provided where guardrail is to be used.
Key concepts: Median, Statistics, Mathematics, Transport engineering, Engineering