Effect of Minimum Quantity Lubrication (MQL) on Tool Wear, Surface Roughness and Dimensional Deviation in Turning AISI-4340 Steel

In all machining processes, tool wear is a natural phenomenon and it leads to tool failure.The growing demands for high productivity of machining need use of high cutting velocity and feed rate.Such machining inherently produces high cutting temperature, which not only reduces tool life but also impairs the product quality.Metal cutting fluids changes the performance of machining operations because of their lubrication, cooling, and chip flushing functions but the use of cutting fluid has become more problematic in terms of both employee health and environmental pollution.The use of cutting fluid generally causes economy of tools and it becomes easier to keep tight tolerances and to maintain workpiece surface properties without damages.Due to these problems, some alternatives has been sought to minimize or even avoid the use of cutting fluid in machining operations.Some of these alternatives are dry machining and machining with minimum quantity lubrication (MQL).This paper deals with the experimental investigation on the role of MQL on cutting temperature, tool wear, surface roughness and dimensional deviation in turning of AISI-4340 steel at industrial speed-feed combinations by uncoated carbide insert.The encouraging results include significant reduction in tool wear rate, dimensional inaccuracy and surface roughness by MQL mainly through reduction in the cutting zone temperature and favorable change in the chip-tool and work-tool interaction.