ScholarLens Back to search
2004•International Conference on High-Power Particle BeamsRequires access

Experimental optimization of a Reflex Triode Virtual Cathode Oscillator

J. Mańkowski, Xupeng Chen, J. Dickens, M. Kristiansen

Open publisher page 1 citations

Abstract

Experimental findings on a high power Reflex Triode Virtual Cathode Oscillator (Vircator) at Texas Tech University are reported. In order to optimize performance, changes to the AK gap distance were made. The AK gap was varied from 0.5 to 1.5 cm. The type of cathode material employed was velvet. Cathode radius was 2.5 cm. The Reflex Triode Vircator is driven by a 350 kV Marx generator with a 60 ns, 20 ohm pulsed forming line. Typical peak input power is 4 GW. The output microwave power is measured in the far-field with a waveguide to coax adapter. Thus far we have observed microwave peak power output as high as 330 MW corresponding to a peak power efficiency of ~ 11 %. In an effort to provide premodulation to the vircator region, reflecting strips were added in the downstream waveguide. This technique has been employed with success by this group with a coaxial Vircator.

About this research paper

What this paper is about

Experimental findings on a high power Reflex Triode Virtual Cathode Oscillator (Vircator) at Texas Tech University are reported. In order to optimize performance, changes to the AK gap distance were made. The AK gap was varied from 0.5 to 1.5 cm. The type of cathode material employed was velvet. Cathode radius was 2.5 cm. The Reflex Triode Vircator is driven by a 350 kV Marx generator with a 60 ns, 20 ohm pulsed forming line. Typical peak input power is 4 GW. The output microwave power is measured in the far-field with a waveguide to coax adapter. Thus far we have observed microwave peak power output as high as 330 MW corresponding to a peak power efficiency of ~ 11 %. In an effort to provide premodulation to the vircator region, reflecting strips were added in the downstream waveguide. This technique has been employed with success by this group with a coaxial Vircator.

Why it matters

OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Experimental findings on a high power Reflex Triode Virtual Cathode Oscillator (Vircator) at Texas Tech University are reported. In order to optimize performance, changes to the AK gap distance were made. The AK gap was varied from 0.5 to 1.5 cm. The type of cathode material employed was velvet. Cathode radius was 2.5 cm. The Reflex Triode Vircator is driven by a 350 kV Marx generator with a 60 ns, 20 ohm pulsed forming line. Typical peak input power is 4 GW. The output microwave power is measured in the far-field with a waveguide to coax adapter. Thus far we have observed microwave peak power output as high as 330 MW corresponding to a peak power efficiency of ~ 11 %. In an effort to provide premodulation to the vircator region, reflecting strips were added in the downstream waveguide. This technique has been employed with success by this group with a coaxial Vircator.

Key concepts: Vircator, Triode, Cathode, Marx generator, Electrical engineering, Optics, Microwave, Diode

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
Experimental optimization of a Reflex Triode Virtual Cathode Oscillator — Research Paper | ScholarLens