Effect of technological factors on bacterial leaching of low-grade Ni-Cu sulfide ore
ZH Fang, QJ Chen
Abstract
ZH Fang, QJ Chen
Abstract
The bioleaching of a low-grade Ni-Cu sulfide ore from Jinchuan Mine with Thiobacillus ferrooxidans (TF5) and Thiobacillus thiooxidans (TT) was investigated. The effect of pH, the initial cell numbers of bacteria, the pulp density and the ratio of TF5 and TT on leaching was described, and the favorable bioleaching conditions for the ore were experimentally confirmed. The aeration leaching, agitation leaching with air bubbling, and column leaching were respectively tested. The highest recovery was achieved in the aeration leaching. After leaching for 20 d with pulp density of 15% the extractions of Ni, Cu and Co were respectively 95.4%, 48.6% and 82.6%.
OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
The bioleaching of a low-grade Ni-Cu sulfide ore from Jinchuan Mine with Thiobacillus ferrooxidans (TF5) and Thiobacillus thiooxidans (TT) was investigated. The effect of pH, the initial cell numbers of bacteria, the pulp density and the ratio of TF5 and TT on leaching was described, and the favorable bioleaching conditions for the ore were experimentally confirmed. The aeration leaching, agitation leaching with air bubbling, and column leaching were respectively tested. The highest recovery was achieved in the aeration leaching. After leaching for 20 d with pulp density of 15% the extractions of Ni, Cu and Co were respectively 95.4%, 48.6% and 82.6%.
Key concepts: Bioleaching, Leaching (pedology), Aeration, Thiobacillus ferrooxidans, Chemistry, Sulfide, Thiobacillus, Metallurgy